Routers

Plato v2.0 no longer requires a router to work!
See how to get version 2.0

Precautions

The Router supplied with Plato is specifically configured for it. Use this configuration to ensure proper operation.
Don’t reset the Router
Supplied devices must only be connected to the Router
Follow the instructions below to avoid any issues

The router network is exclusively for use with Plato. Do not connect any other devices to the network.

You’ve received a WiFi Router and a 4G module with Plato.

Unbox the RUT240

Insert the SIM card supplied by your retailer in the RUT240

Attach the Mobile antennas to the MOBILE ports on the back of the RUT240

Connect the Power supply cable to the POWER socket on the back of the RUT240 and plug the other end into a power outlet

The POWER light should now be on

5. Unbox the RUTX10

6.
a. Connect an Ethernet cable to the LAN port on the RUT240 router
b. Connect the other end to the WAN port on the RUTX10 Router

Attach both WiFi antennas to the WiFi ports on the back of the RUTX10

Connect the Power supply cable to the PWR socket on the back of the RUTX10, then plug the other end into a power outlet

The POWER, WAN and 2.4 green lights should turn on

Make sure the Ethernet cable connects the RUTX10 WAN port to the RUT240 LAN port at all times

Plato and the Tablet must only be connected to the Router

Once the Router is set up

1. Look under your Router to find its WiFi network information

qr code

2. Follow the instructions displayed on Plato and the Tablet to connect them to the Router network

qr code

Make sure you select the 2.4 GHz SSID network

Make sure a SIM card has been inserted in the RUT240

Check the 4G network is strong enough in your current location

Check you still have enough mobile data available on your plan

If abroad, make sure roaming is activated on your SIM card Insert the SIM card in a smartphone to check

Please, refer to the Router’s manufacturer documentation for full usage instructions

WiFi Router
RUTX1O
https://wiki.teltonika-networks.com/view/RUTX10_Manual

4G module
RUT240
https://wiki.teltonika-networks.com/view/RUT240_Manual

You can now update Plato and install version 2.0, which will give you 2 options:

You can keep the router and use its Wi-Fi network.
You can unplug the router and connect Plato and the tablet directly to your own Wi-Fi network. Go to Settings / Internet and change network.

It’s now possible to use Plato without the tablet, mapping directly from the robot, without a tablet and without Internet connectivity.